1- Poncho in Puddel with neck





Size: 2- 3/4- 5/6 (7/8- 9/10- 11/12) years
Size in cm: 86/92-98/104-110/116 (122/128-134/140-146/142)

Materials: GARNSTUDIO's Puddel
200-250-250 (300-300-350) g colour no 7, middle grey
and use: GARNSTUDIO's Karisma Superwash
50-50-50 (50-50-50) g colour no 21, middle grey

DROPS needle size 8 mm and double pointed needles size 2.5 mm
-------------------------------------

Knitting tension: 9 sts x 12 rows on needle size 8 mm with Puddel and stocking st = 10 x 10 cm.
Rib edge: * K1, P1 *, repeat from *-*.
Knitting tip: Knit poncho in two pieces and sew tog sides. Knit each part from neck down. When inc on each side of the middle st the point is automatically created.

Front piece: Read knitting tip! Cast on 25-27-29 (31-33-35) sts (incl 1 edge st each side) on needle size 8 mm with Puddel, insert marking thread in mid st. Knit stocking st – at the same time inc 1 st on each side of mid st on every other row until final measurement. When piece measures 16-18-20 (22-24-26) cm cast off 1 st each side: 3-4-4 (5-5-4) times every 8-6.5-7 (6-6-7.5) cm. After last cast off continue inc until piece measures 41-45-48 (53-55-57) cm. Approx 67-73-79 (85-89-95) sts on needle. Cast off with double yarn.
Back: Knit like front piece.
Assembly: Sew sides tog. Gather approx 76-90 sts up round neck on double pointed needles size 2.5 mm with Karisma, knit 4-4-4 (5-5-5) cm rib edge, cast off with Puddel.

Leg warmers in Karisma Superwash.

Size: 2/4- 6/8- 10/12 years
Length: 20-25-30 cm

Materials: GARNSTUDIO`s Karisma Superwash
100-100-150 g colour no 53, charcoal grey.

DROPS double pointed needles size 3 mm

Knitting tension: 24 sts x 34 rounds on needle size 2.5 mm and stocking st = 10 x10 cm. Remember needle sizes are guidelines only.
Rib: * K2, P2 *, repeat from *-*.
Leg warmer: Cast on 52-68-80 sts on double pointed needles size 3 mm with Karisma Superwash. Knit 20-25-30 cm rib, cast off in rib.

Diagram



--------------------------------------------------------------------------

2- Poncho & hat




Size: 1/3 – 6/9 – 12/18 months (2 – 3/4years)
Size in cm: 50/56 – 62/68 – 74/80 (92/104)
Measurements: length mid front approx: 30-32-34 (38-41) cm

Materials: Alpaca
50-50-50 (100-100) g colour no 3140, baby pink
50-50-50 (100-100) g colour no 3720, pink
50-50-50 (100-100) g 7300, apple green
and use:
Eskimo
50 g for all sizes colour no 35, apple green

DROPS circular needle size 6mm
DROPS crochet hook size 8mm
------------------------
Knitting tension: 14 sts x 18 rows on needle size 6mm with 3 strands of Alpaca in stocking stitch = 10x10cm.

PONCHO: Start at the top and knit down and outwards. Cast on 54-56-58 (60-62) sts on circular needle size 6mm with 1 strand of each Alpaca colour (= 3 strands). Insert a marking thread between the 2 middle sts (= mid back). Knit 2 rows garter sts back and forth on needle from mid front (= end of rows), continue knitting back and forth (= slit mid front) as follows: Knit stocking sts with the 2 outermost sts each side (mid front) in garter sts. At the same time, increase 4 sts on every other row (= from the right side) as follows: knit 4, 1 yo, 1 yo on each side of the middle 8 sts and 1 yo when there are 4 sts left on needle. On next row, knit yo’s to create holes. When piece measures 6-7-8 (9-10) cm, discontinue the slit and continue round on needle – knit all sts. Continue the increases, i.e. on each side of the middle 8 sts back and front. When there are 138-148-158 (168-178) sts on round, purl 1 round, knit 1 round whilst inc 1 st in every 4th st on round. On next round, cast off in purled sts.

Crochet borders: Using Eskimo and crochet hook size 8, crochet a border round lower edge of poncho as follows: 1 dc in 1st st, *4 ch, 1 tr in the 1st of the 4 ch just crochet, skip 3 sts, 1 dc in next st*, repeat from *-*, and finish with 1 sl st in 1st dc.
Crochet as follows round neck and along slit mid front (begin at top left side of slit): 1 dc in 1st st, *1 ch, skip 2 sts/rows, 1 dc in next st/row*, repeat from *-* and finish with 1 sl st in 1st dc. Continue round neck (not slit) as follows: 1 dc in 1st st, *4ch, 1 tr in the 1st of the 4 ch just crochet, skip 1 ch, 1 dc in next ch*, repeat from *-*.
Crochet a ch-string approx 60-65-70 (75-80) cm long and pull through the 1st crochet round at neck. Make 2 small pompoms in Eskimo and attach to ch-string.

HAT:

Size: 1/3 – 6/9 – 12/18 months (2 – 3/4years)
To fit head circumference in cm: 40/42 – 42/44 – 44/46 (46/48 – 50/52)
Materials: Eskimo
50-50-50 (100-100) g colour no 35, apple green

DROPS crochet hook size 8mm

Crochet gauge: 8 tr x 5 rows = 10x10 cm

Crochet tips: Replace 1st tr on each round with 3 ch.

Crochet the hat from top down. Crochet 6 ch and form a ring with a sl st.
1st round: 10 tr in ch-ring – see Crochet tips!
2nd round: 1 tr in the 1st tr, *1 ch, 1 tr in next tr*, repeat from *-* and finish with 1 ch and 1 sl st in 1st tr from beginning of round
3rd round: *1 tr in 1st tr, 2 tr in ch-loop*, repeat from *-* and finish with 1 sl st in 1st tr from beginning of round ( = 30 tr)
4th round: 1 tr in 1st tr, *1 ch, skip 1 tr, 1 tr in next tr*, repeat from *-* and finish with 1 sl st in 1st tr from beginning of round) (= 15 tr)
5th round: Continue with 1 tr in each tr and 1 tr in each ch, but crochet 2 tr in 0-2-4 (6-8) tr evenly distributed on round = 30-32-34 (36-38) tr.
Now crochet 2-3-3 (4-4) rounds with 1 tr in each tr.
Crochet next round as follows: 1 dc in 1st tr, *2 ch, skip 1 tr, 1 dc in next tr*, repeat from *-* and finish with 1 sl st in 1st dc from beginning of round. Cut the thread. The hat measures approx 15-17-17 (19-19) cm from top to bottom edge.
-----------------------------------------------------------------------------------------------------

3-shawl with crochet triangles



Size: One-Size
Materials: Drops Silke-Alpaca
400 g colour no. 3609, red
150 g colour no. 3755, rose
---------------

Crochet tension: 1 triangle = approx 20 cm from corner to corner

Crochet triangles: Crochet 4 ch with Rose and make a loop with a sl st
1st round: *1 dc in the ch loop, 3 ch*, repeat from *-* a total of 3 times and finish with a sl st in the first dc = 3 ch loops.
2nd round: Crochet as follows in each ch loop: 1 sl st, 5 tr, 1 sl st.
3rd round: Bend the leaves from previous round towards you and crochet at the back side of each leaf as follows: *1 dc in the first dc from first round, 3 ch, 1 dc around the bottom of the middle tr on the first leaf*, repeat from *-* behind all 3 leaves = 6 ch loops, finish with a sl st in the first dc.
4th round: Crochet as follows in each ch loop: 1 sl st, 5 tr, 1 sl st.
5th round: Change to red. Bend the leaves from previous round towards you and crochet at the back side of each leaf as follows: 1 dc around the first dc from the third round,*4 ch, 1 dc around the bottom of the fourth tr in the next leaf from previous round, 4 ch, 1 dc around the second tr from next leaf from previous round, 4 ch, 1 dc around the next dc from third round*, repeat from *-* a total of 3 times = 9 ch loops, finish with a sl st in the first dc.
6th round: Crochet as follows in each ch loop: 1 sl st, 6 dtr, 1 sl st.
The flower is finished. Now crochet 4 rounds of ch loops around it.
7th round: Bend the leaves from previous row towards you and crochet as follows: 4 ch, 1 dc around the bottom of the middle 2 dtr on the first leaf from previous row, *8 ch, 1 dc around the bottom of middle 2 dtr on the next leaf*, repeat from *-* until finished round and finish with a sl st in the first dc = 9 big ch loops.
8th round: 4 ch, 1 dc in the first ch loop, *9 ch, 1 dc around the next ch loop*, repeat from *-* until finished round and finish with a sl st in the first dc
9th round: 4 ch, 1 dc in the first ch loop, *10 ch, 1 dc around the next ch loop*, repeat from *-* until finished round and finish with a sl st in the first dc
10th round: 5 ch, 1 dc in the first ch loop, *10 ch, 1 dc around the next ch loop, 18 ch (= corner, 1 dc in the next ch loop, 10 ch, 1 dc in the next ch loop*, repeat from *-* until finish round and finished with a sl st in the first dc

Assembly: Crochet a total of 15 triangles. Put them next to each other according to figure-1, i.e. 2 circles with 5 triangles, 1 square with 4 triangles and 1 separate triangle.
Crochet the triangles tog with red as follows: Put the triangles tog. WS towards WS and crochet along one edge as follows: 1 dc around both triangles, *1 ch, skip 1 cm, 1 dc around both triangles*, repeat from *-*.
NB! At the corners where the curves are drawn on figure-1 begin to crochet inside the big ch loop and at the corner and where no curves are drawn crochet tog. all the way to the mid of the big ch loop at the corner - see figure-1.
When the triangles are crochet tog to 2 circles and 1 square, crochet the 3 parts tog at the arrows, crochet the same way as earlier. Finish with an edge in red around the shawl as follows: *1 dc, skip 1 st, 1 ch*, repeat from *-* and finish with 1 sl st in the first dc.



------------------------------------------------------------------------------------------------------------------

4-crochet shawl in ”Cotton Viscose"



Meassurement: approx 220 cm wide x 80 cm high
Materials: Drops “Cottton Viscose”
400 g colour no 05, red

DROPS Crochet hook size 4 mm – or the crochet hook size needed to obtain correct crochet tension

------------------------------

Crochet tension: 1 square = 20 cm wide x 16 cm high
Pattern: See diagram M.1 and M.2. M.2 shows enlarged square of M.1. English Translations for the wording in the diagram are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Tips for measuring: Due to weight of yarn, shawl will get much bigger when held up.

Shawl: Crochet after M.1. NB: Crochet tr around the ch loops. Continue inc on sides in same way until shawl has 9 whole squares in width – piece measures approx 80 cm i height and 220 cm in width.

www.garnstudio.com

= ch
= dc
= tr
= Trible tr

Diagram



------------------------------------------------------------------------

5- shawl crochet




Measures: Width at the top: approx. 210 cm
Length at the mid back: approx. 80 cm
Materials: DROPS Silke-Alpaca
500 g colour no. 6230, grey blue

DROPS crochet hook size 6 mm or the size needed to obtain the correct crochet tension.

Crochet tension: 2.5 tr groups in the width x 4 tr groups in the height, using hook size 6 mm and Silke-Alpaca = 10 x 10 cm.
Pattern: See diagram M.1. The diagrams are seen from the RS. English Translations for the wording in the diagrams are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Measurement tips: Because of the weight of the yarn, all measurements should be made whilst the garment is hanging.
Crochet tips: For a quadruple tr crochet the same way as done for a dtr (see school of crochet – page 3), but make 4 yo’s around the hook (instead of 2) before pulling the hook through the st in the work.
Crochet info (apply for the crochet edge): Substitute the first dtr beg. of round with 4 ch.

Shawl:- Read Crochet tips. Crochet 5 ch and make a ring with a sl st. Then crochet according to M.1 NB! Crochet all dtr around the ch-loops from previous row. After M.1 is completed continue the inc. at the sides the same way as done earlier until the piece measures 80 cm in the height.
Crochet edge: - read crochet info! Crochet 1 row around all off the shawl as follows: Around the small loops (4 ch/dtr) from the shawl: 3 dtr, 1 ch.
Around the big loops (8ch/ quadruple tr) from the shawl and the ring at the beginning of the shawl: *3 dtr, 1 ch*, repeat from *-* 2 times.
Continue only to crochet along the sides of the shawl – not the top edge:
1st row: 1 dtr around the ch from previous row, *3 ch, skip 3 dtr, 1 dtr in the next ch*, repeat from *-*. Turn.
2nd. row: 2 dtr in the first dtr,* 4 ch, 2 dtr in the same dtr, 1 ch, 2 dtr in the next dtr*, repeat from *-* until finish round.

English translations to the diagram:

=ch
=dtr
=quadruple tr – read Crochet tips
=this row is explained in the pattern, beg. at the 2nd row.


Diagram






--------------------------------------------------------------------------------------------------
6-Cape, wrist warmers and hat with cable pattern






CAPE:
Size: S/M – L – XL/XXL
Materials: Eskimo
400-450-500 g colour no 01, off-white

Drops circular needle size 9 mm (40 and 80 cm) or size needed to obtain the correct tension.

WRIST WARMERS:
Size: S/M – L/XL
Materials: Eskimo
100 – (150) g colour no 01, off-white

Drops pointed needles size 9 mm or size needed to obtain the correct knitting tension.

HAT:
Size: one-size
Materials: Eskimo
150 g colour no 01, off-white

Drops double pointed needles size 9 mm or size needed to obtain the correct knitting tension.



-------



CAPE:

Knitting Tension: 10 sts x 14 rows on needle size 9 mm in stocking sts = 10 x 10 cm.
Pattern: See diagram M.1 The diagram is seen from the right side. English translations for the wording in the diagram are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Garter sts (round on circular needle): knit 1 round, purl 1 round. Repeat these 2 rounds.
Lace border:
1st row: K2, 2 yo, K2
2nd row: K2 sts in first st, K2, P1 (in second yo), K2
3rd row: K7
4th row: Cast off 3 sts, K4.

The cape is knitted round on circular needle from the bottom edge towards the top. Cast on 156-164-172 sts on circular needle size 9 mm with Eskimo. Knit 1 round, P 1 round and K 2 rounds, P 1 round and knit 1 round. Continue as follows:
Size S/M: *M.1 (= 34 sts), P5, repeat from *-*.
Size L: *M.1 (= 34 sts), P7*, repeat from *-*.
Size XL/XXL: *M.1 (= 34 sts), P9*, repeat from
When piece measures 17-19-19 cm beg dec for shoulder/neck. Insert a marking thread at the beg of round and measure from this point onwards.
On 1st round: Dec 2 sts by in each bubble section by K tog the first 2 and the last 2 P sts = 148-156-164 sts.
On 2nd round: dec 1 st in each 3K section by K tog the first 2 sts = 136-144-152 sts.
Now dec as follows:
Size S/M:
3rd round: 2 sts in each bubble section (dec as before) = 128 sts.
4th, 6th, 8th and 10th round: 1 st in each P section with 6P (P tog the first 2 sts).
5th, 7th, 9th, 11th and 13th round: 1 st in each P section with 5P (P tog the first 2 sts). On the 13th round K tog the last P st with next st.
(No dec on the 12th round)
After all dec are complete = 76 sts left on round.
Size L:
3rd, 5th, 7th, 9th, 11th 12th and 13th round: 1 st in each P section with 7P (P tog the first 2 sts). On the 13th round K tog the last P st with next st.
4th, 6th, 8th and 10th round: 1 st in each P section with 6P (P tog the first 2 sts).
After all dec are complete = 84 sts left on round.
Size XL/XXL:
3rd, 5th, 7th, 9th, 11th, 12t, 13th , 14th and 15th round: 1 st in each P section with 9P (P tog the first 2 sts). On the 15th round K tog the last P st with next st.
4th, 6th, 8th and 10th round: 1 st in each P section with 6P (P tog the first 2 sts).
After all dec are complete = 84 sts left on round.
All sizes:
On next round dec by K tog sts 2 by 2 in sections with K4 = 68-76-76 sts. When piece measures approx 38-40-42 cm – adjust to after 1 bubble in M.1 – dec 2 sts in each cable as follows: K2 tog, K2, slip 1 st as if to knit, K1, psso = 60-68-68 sts. Knit 4 rounds in garter sts and cast off loosely.
Lace border: Cast on 4 sts on needle size 9 mm with Eskimo and knit lace border – see above. Cast off when border measures 150-158-166 cm measured on the shorter side. Sew border tog to form a ring and sew to bottom edge with the “spikes” pointing downwards.

WRIST WARMERS:

Knitting Tension: 10 sts x 14 rows on needle size 9 mm in stocking sts = 10 x 10 cm.
Pattern: See diagram M.2 The diagram is seen from the right side. English translations for the wording in the diagram are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Lace border:
1st row: K2, 2 yo, K2
2nd row: K2 sts in first st, K2, P1 (in second yo), K2
3rd row: K7
4th row: Cast off 3 sts, K4.

Knitted back and forth on needle. Cast on 20 (24) sts (incl 1 edge st each side, knitted in garter sts throughout) on needle size 9 mm with Eskimo. Knit 3 rows (1st row = RS) and P 3 rows.
Knit next row as follows from the RS:
Size S/M: 1 edge st, 6 sts in reverse stocking sts, M.2 (= 6 sts), 6 sts in reverse stocking sts and 1 edge st.
Size L/XL: 1 edge st, 8 sts in reverse stocking sts, M.2 (= 6 sts), 8 sts in reverse stocking sts and 1 edge st.
When piece measures approx 23 (25) cm inc 1 st in the 3rd and 5th P st in both P sections = 24 (28) sts – adjust to after 2 or 4 rows after a cable. Knit 2 rows and cast off loosely from the WS. Piece measures approx 25 (27) cm.
Assembly: Knit 2 lace borders, each 18 (22) cm long measured on the shorter side (see explanation above). Sew border tog to form a ring and sew to the bottom edge of wrist warmer.



HAT:

Knitting Tension: 10 sts x 14 rows on needle size 9 mm in stocking sts = 10 x 10 cm.
Pattern: See diagram M.3 The diagram is seen from the right side. English translations for the wording in the diagram are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Garter sts (round on double pointed needles): knit 1 round, purl 1 round. Repeat these 2 rounds.

Knitted round on double pointed needles. Cast on 52 sts on needle size 9 mm in Eskimo. Knit 2 rounds in garter sts. On next round inc 20 sts evenly = 72 sts. Continue as follows: *P4, M.3 (= 8 sts)*, repeat from *-*. When piece measures 22 cm – adjust to after 2 or 4 rounds after a cable – knit tog all sts 2 by 2 = 36 sts. Repeat the dec on next round = 18 sts. Cut the thread and pull it through remaining sts.

English explanation to pattern diagram:

Blank square = Knit
Cross in square = Purl
Black square = Bubble: K1, I yo, K1, I yo, K1 in the same st (= 5 sts). Turn. Knit 4 rows stocking sts over these 5 sts. Now lift 2nd st on right needle over first st, 3rd st over first st, 4th st over first st and 5th st over first st = 1 st left.
Triangle over 6 squares = Put 3 sts on cable needle in front of piece, K3, K3 from cable needle
Upright triangle over 6 squares = Put 3 sts on cable needle behind piece, K3, K3 from cable needle
Triangle over 8 squares = put 4 sts on cable needle in front of piece, K4, K4 from cable needle.

Diagram












-----------------------------------------------------------------------------------------------------

7-Cape and hair band



CAPE:
Size: one-size
Materials: Alpaca
50 g colour no 0100, off-white
100 g colour no 0501, light grey

Drops crochet hook size 4.5 mm – or the size needed to obtain the correct tension.
Drops silver button, no 534: 5 pcs.

HAIR BAND:
Size: one-size
Materials: Alpaca
100 g colour no 0501, light grey

Drops pointed needles size 3.5 mm – or the size needed to obtain the correct tension.

CAPE:
Crochet Tension: 15 tr x 7 rows with 2 threads Alpaca = 10 x 10 cm.
Stripe Pattern: See diagram M.1. English translations for the wording in the diagrams are given at the bottom of this pattern, and they are given in the vertical order in which they appear in the diagram.
Crochet info: Replace the first tr at the beg of row with 3 ch. Finish the row with 1 tr in the 3rd ch from beg of previous row.

The cape is crochet from the top down. Loosely crochet 93 ch with crochet hook size 4.5 mm and 2 threads light grey Alpaca. Crochet first row as follows:
1 tr in the 4th ch from hook, 1 tr in next ch, *skip 1 ch, 1 tr in the next 3 ch*, repeat from *-* = 69 tr (incl 4 tr for front edge each side). Now crochet 1 tr in each tr – read Crochet info – at the same time crocheting stripes after M.1. After 5 rows of tr beg the inc (continue M.1 as before):
1st row: 1 tr in each of the first tr, 2 tr in next tr, *1 tr in each of the next 4 tr, 2 tr in next tr*, repeat from *-* until there are 9 tr left on row and crochet 1 tr in each of these = 80 tr, turn the piece
2nd row: 1 tr in each of the first 10 tr, 2 tr in next tr, *1 tr in each of the next 5 tr, 2 tr in next tr*, repeat from *-* until there are 9 tr left on row and crochet 1 tr in each of these = 91 tr, turn the piece
Continue the inc like this, i.e. 1 more tr between each inc on each row until there are 168 tr on row (= 14 rows with tr and 1 repeat of M.1). Cut the thread and sew.

Border: Crochet a border round the whole cape (i.e. along bottom edge, front edges and the neck) with crochet hook size 4.5 mm and 2 threads light grey Alpaca as follows: 1 dc in first tr, *1 ch, skip approx 0.5-1 cm, 1 dc in next tr*, repeat from *-* and finish with 1 ch and 1 sl st in the first dc from beg of round.
Tassels: Put tassels along the bottom edge of the cape with approx 4 tr in between each as follows: *2 light grey tassels, 1 light /off-white tassel*, repeat from *-* all the way round.
1 tassel: cut 8 threads of Alpaca measuring approx 15 cm each. Fold them double and pull the loop through the last row of tr, pull the ends through.
Sew the buttons on left front edge, the top one approx 1 cm from the neck line and the bottom one approx 1 cm from the bottom. Use tr’s on the right front edge as button holes.

HAIR BAND:
Knitting Tension: 22 sts x 30 rows on needle size 3.5 mm with 2 threads Alpaca in stocking sts = 10 x 10 cm.
Garter sts: Knit all rows.
Pattern: See diagram M.2. The pattern in the diagram is seen from the RS. English translations for the wording in the diagrams are given at the bottom of this pattern.

Cast on 52 sts on needle size 3.5 mm and 2 threads Alpaca. Knit as follows (from lower edge towards the top): 1 st in garter sts, K5, M.2 (= 34 sts), K3, P3, K5, 1 st in garter sts. Continue in pattern like this until piece measures approx 54-57 cm – adjust to after a full or half repeat of M.2. Cast off.

Assembly: Sew tog the seam mid back. Fold the outermost 6 sts each side towards the WS and attach.

English explanation to pattern diagram:

Line in square = 2 threads off-white
Circle in square = 2 threads light grey
Black square = 1 thread off-white + 1 thread light grey
Blank square = K from RS, P from WS
Cross in square = P from RS, K from WS
Triangle and line from right to left over 5 squares = put 3 sts on cable needle in front of piece, P1, K3 from cable needle
Triangle and line from left to right over 5 squares = put 1st on cable needle behind piece, K3, P1 from cable needle
Upward pointing triangle over 6 squares = put 3 sts on cable needle behind piece, K3, K3 from cable needle
Downward pointing triangle over 6 squares = put 3 sts on cable needle in front of piece, K3, K3 from cable needle.





Diagram





لسه فى تانى